Find the Best Motorcycle Lift Tables & Jacks

ATTENTION: Taking care of a task for your motorcycle? You should be prepared to satisfy any insurance requirements.

Please enter your zip code below to get started.

Whether you’re working on a basket case motorcycle project or are performing some routine maintenance, a proper motorcycle lift is going to help make the work easy and help protect your back and knees from constantly bending and crouching.

Working on your bike – especially big projects – can be hard on the body.

Getting the bike up and off the ground makes accessing and seeing what you’re working on so much easier.

The OTC low-profile motorcycle jack is a sturdy, affordable option that’s going to get the job done for most home mechanics and is going to work for most bikes – even bigger Harleys. may earn an affiliate commission when you make a purchase through the links on this page.

Top Picks for Motorcycle Lifts

Our top picks for the best lifts and jacks are:

  1. OTC motorcycle lift
  2. VIVOHOME Hydraulic Motorcycle Lift Jack
  3. Orion Motor Tech Motorcycle Scissor Jack
  4. APlusLift Motorcycle Lift Table

Keep reading to learn more about each option.

How to Use a Motorcycle Jack

Operating your motorcycle jack is pretty simple.

  • Position the jack under your motorcycle along an even lifting point that’s unobstructed by the exhaust, kickstand, or anything else.
  • Use tie down straps to ensure the bike stays secure.
  • Operate the jack’s lever or lifting mechanism.
  • Confirm that the lifting points are solid and continue.
  • Lift the bike up to where you want it or to the jack’s limit.

What is the best motorcycle lift?

The best lift for your motorcycle really depends on your workspace, the type of bike your have, and the type of work you’re doing.

If you’re got a smaller bike, or only need to jack it up ever once in a while, a simpler lift like a scissor jack stand will probably do the trick.

If you’ve got a larger motorcycle, perform some more involved maintenance, or are working on a restoration project, a bigger lift or even a lift table might be a better choice.

In addition to OTC lift, some other great choices for the best motorcycle lift include:

OTC Ultra Low Profile Motorcycle Lift

The OTC motorcycle lift is an affordable option that’s going to work for most bikes.

This lift features:

  • 1,500 pound capacity.
  • 17″ lift stand that is large enough for Harley Davidson and other wide cruisers.
  • Minimum clearance of 3 1/2.”
  • Lift range from 3 1/2″ to 16 3/4.”
  • Removable lift handle allows you to get it out of your way once the bike is up.
  • Locking casters to make moving it around the shop easy.
  • Foot pedal release.
  • Automatic safety lock.
  • Ratchet tie downs.
  • 2 year limited warranty.

This is a solid lift that’s going to be adequate for most home mechanics.

Your bike will be secure and sturdy on the lift, and make it’ll help make much easier work of most maintenance procedures with the bike off the ground.

It’s a heavy, well-built, easy-to-assemble choice that won’t break your budget.

VIVOHOME Hydraulic Motorcycle Lift Jack

The VIVOHOME motorcycle lift is a cheaper alternative to the OTC with pretty much the same features.

It has a lift capacity of 1,500 pounds over it’s 2″ x 12″ lift pads.

Its height range goes from about 4.5″ to 15.”

Orion Motor Tech Motorcycle Scissor Jack

If you’ve got a smaller bike or only do in-frequent maintenance that could benefit from lifting the bike, the Orion motorcycle scissor jack is a great choice.

This hand operated jack has a lifting capacity of about 1,000 to 1,200 pounds and a lifting range of 3 3/4″ to 13 2/5.”

Rubber-lined platform dimensions are 9 4/5″ x 15 3/4.”

It’s available at a much lower cost than the other lifts here.

APlusLift Motorcycle Lift Table

If you’ve got a large motorcycle or are frequently working on bigger projects for your bikes, a motorcycle lift table is the way to go.

This air-powered lift table has a capacity of 1,500 pounds and can handle the largest and widest of motorcycles.

Minimum lift height is 7″ and maximum is 33.”

Includes a smaller service jack for quick jobs or when working on multiple bikes at once.

Ramps can be removed to give you complete access to the bike.

Drop out bottom plate, built in wheel chock, durable, professional finish.

This is a serious lift if you’ve got heavy bike or work on your motorcycles alot.

Get the Best Lift for Your Workshop

Make your next motorcycle repair or maintenance job a whole lot easier by getting a proper lift or jack.

Save your back, save your knees, and get the work done faster.

If you’ve got the space and the budget, a bigger, sturdier lift is worth it. It’s definitely a good choice if you see yourself doing multiple motorcycle restoration projects down the road.

If you need something you can get out of the way, a smaller, hand operated scissor jack is the way to go.

Do you have experiences with any of these motorcycle lifts? Maybe you’re using something different? Share your experience in the comments below.